Air Station and Tank Filling Hardware

AIR STATION FITTINGS

TANK FILLING HARDWARE

PIGTAILS, GAS TEES, CYLINDER VALVES:

Using the picture above:

High-pressure Air Pigtail :CGA 347 flexible, braided stainless, 6,000 psi
Pigtail (for Oxygen CGA 540, or Air CGA346): brass 3,000 psi
Yolk Assembly: Scuba tank yolk with 1/4" F NPT
Nut/Flange: This is part of the Yolk above. It is the 1/4" F NPT
Converter Block: Chrome-plated brass. Scuba O-ring on block and 1/4" F NPT
High-pressure Air Manifold Tee: CGA 347, Stainless, 6,000 psi
Air Manifold Tee: CGA 346, brass, 3,000 psi
Oxygen Manifold Tee: CGA 540, brass, 3,000 psi
Bleeder/Drain Device: 1/4" M NPT with a rubber-seated bleeder screw, 3,000 psi
High-Pressure Bleeder Device: Similar to above for 6,000 psi
In-Line Bleeder Block: 1/4" M and F NPT, 6,000 psi
Handtite Nut/Tailpiece: For use with SCBA filler (below), air fills to 4,500 psi
Handtite Nut/Tailpiece: For use with Scuba to SCBA Adapter (below), air fills to 4,500 psi
High-pressure Air Nut/Tailpiece: CGA 347, stainless, 6,000 psi
Inert (CGA 580) and Premixed (CGA 590) Gas Nut/Tailpiece: For adapting industrial valves to 1/4" M NPT, 3,000 psi
Air Nut/Tailpiece: CGA 346 (brass) 3,000 psi
Oxygen Nut/Tailpiece: CGA 540(brass) 3,000 psi
Air Manifold/Control Block: 9" chrome-plated brass. eight 1/4" F NPT outlets. Used to distribute air. 5,000 psi

E-MAIL Deep-Six , or call our toll-free number (888-901-5780), for the latest Super SALE PRICES

CGA 346, CGA 347, CGA 540, CGA 580 NUT & NIPPLES AND ADAPTERS (OX MEANS IT IS CLEANED FOR OXYGEN):

PRESSURE-RELIEF VALVES, LINE/FILLER VALVES, BALL VALVES, & CHECK VALVES:

E-MAIL Deep-Six , or call our toll-free number (888-901-5780), for the latest Super SALE PRICES

GAS REGULATORS, BLEEDERS, COMPRESSOR CONTROL SWITCH:

NOTE: THE 46100 ABOVE HAS BEEN DISCONTINUED

GAUGES TO MEASURE GAS PRESSURE:

E-MAIL Deep-Six , or call our toll-free number (888-901-5780), for the latest Super SALE PRICES

HIGH PRESSURE FITTINGS:

COMPRESSED GAS MANIFOLD BLOCKS:

E-MAIL Deep-Six , or call our toll-free number (888-901-5780), for the latest Super SALE PRICES

COMPRESSED AIR FILLER WHIPS:

Using the picture above, the products listed below follow from the top to the bottom.

Standard Filler Whip: Standard scuba yolk with bleeder block assembly, line valve, and a 5' flexible hose with 1/4" M NPT on the free end, 3,200 psi service.
DIN Tank Filler Whip: Male DIN fitting with bleeder block assembly, line valve, and a 5' flexible hose with 1/4" M NPT on the free end, 4,350 psi service.
DIN/Yolk Converto Filler: DIN Male fitting, bleeder block, line valve and 5' hose. Has a scuba yolk that fits the DIN threads making the conversion in seconds.
Deluxe Filler Whip: Standard scuba yolk with bleeder block assembly attached at right angles to a stainless steel ball valve which allows excellent flow control, and a 5' flexible hose with 1/4" M NPT on the free end, 3,200 psi service.
Sherwood Scuba Filler Whip: Same as the Standard Filler Whip with a Sherwood unitized filler.
Deluxe Universal Filler Whip: Convertible filler unit that can Scuba, DIN, CGA 346 and CGA 347 valves. It has a DIN Male fitting, bleeder block, line valve and 5' hose. It comes with A female DIN to Scuba, as well as a female DIN to Cga 346/347 adapters that attach in seconds. It is rated for 4500 psi service.
High Pressure SCBA Filler Whip: CGA 347 handtite nut/tailpiece with bleeder block assembly, line valve, and a 5' flexible hose with 1/4" M NPT on the free end, 4,400 psi service.

TANK FILLING HARDWARE AND HIGH PRESSURE VALVES: